Reliable Warehouse & Industrial Security Systems
Protecting South East logistics, manufacturing and distribution businesses across Kent, London & East Sussex.
The Security Challenges Facing Warehouses & Industrial Sites
Warehouses and industrial premises face a distinct set of security and fire safety challenges that differ significantly from offices or retail environments. Large sites, high-value stock, multiple access points, and extended periods of unmanned operation all create vulnerabilities that require a purpose-designed approach.
-
Large Perimeter & Multiple Entry Points
Warehouses and industrial sites typically have extensive perimeters with multiple vehicle and pedestrian entry points. Covering all of these with standard security measures requires careful system design and the right combination of cameras, detectors, and access control.
-
High-Value Stock & Plant
Warehouses hold significant quantities of high-value goods, machinery, and plant equipment. Theft of stock or plant can cause serious financial losses and operational disruption, particularly for logistics and distribution businesses.
-
Unmanned Overnight Periods
Many warehouses and industrial sites operate on reduced staffing or are completely unmanned overnight and at weekends. Without professional monitoring, a break-in or fire can go undetected for hours, significantly increasing losses and damage.
-
Multiple Contractor & Vehicle Access
Logistics sites in particular have high volumes of vehicle and contractor movements throughout the day. Managing who enters the site, when, and in which vehicle is a significant operational and security challenge.
-
Fire Detection in Large Open Spaces
Standard point detectors are not appropriate for large open warehouse spaces. Beam detection systems are required to provide adequate coverage across high-ceiling, open-plan environments in line with BS5839 standards.
CCTV for Warehouses & Industrial Sites
A warehouse CCTV system needs to cover far more ground than a typical office or retail installation. GMSE designs large-scale CCTV systems for warehouses and industrial sites, combining perimeter coverage, internal monitoring, and ANPR vehicle tracking into a single managed system.
-
Perimeter & External Areas
Wide-angle HD cameras covering the full site perimeter, external storage areas, and loading bays. Long-range cameras for large external areas, with infrared night vision as standard for 24-hour coverage without additional lighting.
-
Internal Racking & Storage Areas
Internal cameras covering racking aisles, storage areas, and dispatch zones. Deterring and detecting internal theft, monitoring stock movements, and providing evidence for insurance claims and stock discrepancy investigations.
-
Site Entrances & Loading Bays
HD cameras at all vehicle and pedestrian entrances, capturing clear footage of everyone entering and leaving the site. Combined with ANPR where vehicle identification is required, this provides a complete record of all site access.
-
ANPR for Vehicle Tracking
Automatic Number Plate Recognition cameras at site entrances log every vehicle entering and leaving. Ideal for logistics and distribution sites with high vehicle throughput, providing a complete audit trail of deliveries, collections, and contractor visits.
Intruder Alarms for Warehouses & Industrial Premises
Warehouses and industrial sites are among the most frequently targeted premises for overnight and weekend break-ins. A professionally monitored intruder alarm system is essential for sites that are unmanned for extended periods, providing fast response when it matters most.
Professionally Monitored Systems
For unmanned warehouses and industrial sites, professional monitoring is not optional, it is essential. When your alarm activates, the monitoring centre contacts your nominated keyholders and, if necessary, alerts the police. Fast response minimises losses and damage significantly.
Graded Systems for Commercial Premises
Warehouse and industrial premises typically require a Grade 2 or Grade 3 alarm system under EN50131, depending on the risk level and insurance requirements. GMSE installs graded systems with full certification documentation, meeting the requirements of most commercial insurance policies.
Perimeter Detection
Large warehouse sites benefit from perimeter detection, including passive infrared detectors covering loading bays, external storage areas, and site boundaries, providing an early warning before an intruder reaches the building itself.
Fire Protection for Warehouses & Industrial Premises
Warehouses and industrial premises have specific fire detection requirements that differ significantly from standard commercial buildings. High ceilings, large open spaces, and the nature of stored goods all influence the type of system required. GMSE's BAFE-certified engineers design and install fire alarm systems specifically suited to industrial environments.
-
Beam Detection for Large Open Spaces
Standard point detectors are not suitable for large warehouse spaces with high ceilings. Optical beam detectors project an infrared beam across the full width of the space, triggering an alarm if smoke interrupts the beam. Essential for large open-plan warehouses in line with BS5839 guidance.
-
Addressable Fire Alarm Systems
For larger or more complex warehouse sites, an addressable fire alarm system identifies the exact zone and device that has triggered, allowing faster and more precise response. Cause and effect programming can automatically trigger HVAC shutdown and sprinkler activation.
-
Sprinkler System Integration
Where sprinkler systems are installed, the fire alarm panel can be programmed to trigger specific sprinkler zones in response to detector activations in high-risk areas, providing targeted suppression alongside the alarm.
-
Fire Risk Assessment
All non-domestic premises must have a current fire risk assessment under the RRO 2005. For warehouses storing hazardous materials, combustible goods, or operating heavy machinery, a thorough risk assessment is particularly important.
Vehicle Access Management for Logistics & Industrial Sites
For warehouses and logistics sites with high vehicle throughput, managing who enters the site and when is both a security and operational requirement. GMSE integrates ANPR, access control, and gate automation into a single vehicle management system that covers the full site entrance.
ANPR at Site Entrances
Automatic Number Plate Recognition cameras at site entrances log every vehicle entering and leaving, in real time. Authorised vehicles trigger barriers or gates to open automatically. Unauthorised or flagged plates trigger an alert. A complete vehicle audit trail is available for operational and insurance purposes.
Integrated Barrier & Gate Systems
Gate Safe-certified automated barriers and gates linked to your ANPR or access control system, managing vehicle flow at busy logistics entrances without the need for a staffed gatehouse. Fast-opening bi-folding gates available for high-throughput sites.
Contractor & Delivery Management
Temporary access credentials for contractors and delivery drivers, issued and cancelled remotely without physical key management. Every contractor visit is logged automatically, providing a complete audit trail for site compliance and insurance purposes.
Frequently Asked Questions
-
For large warehouse sites, we typically recommend a combination of long-range perimeter cameras for external coverage, wide-angle internal cameras for racking and storage areas, and ANPR cameras at site entrances for vehicle tracking. The exact specification depends on the size and layout of your site. GMSE will assess your specific premises and recommend the most appropriate system at your free survey.
-
For most warehouses with high ceilings and large open spaces, optical beam detectors are required to provide adequate fire detection coverage in line with BS5839 guidance. Standard point detectors are not suitable for large open-plan spaces and will not provide the coverage required by your insurer or the Fire and Rescue Authority. Our BAFE-certified engineers will specify the correct detection system for your building at survey stage.
-
Yes. Where existing systems are in place, we assess their condition and compatibility at survey stage and advise on the most cost-effective approach, whether that is integrating new equipment with existing infrastructure or replacing systems that are no longer fit for purpose.
-
Yes. Our engineers cover the full county, with particular experience working with logistics and distribution businesses along the M20 corridor and around Dover. We also cover industrial estates across London and East Sussex. Get in touch to confirm coverage for your specific site.
Get a Free Warehouse Security Survey
Our engineers cover Kent, London and East Sussex, with particular experience working with logistics and industrial businesses along the M20 corridor and around Dover. We'll visit your site, assess your fire and security requirements, and provide a written quote covering everything from perimeter CCTV and ANPR to fire alarms and monitored intruder alarms.
Or call us on 01580 467070